Using the app to check your units load bars

• Related Articles

• Using the App to Upload Data

  The Optiweigh App can be used to get data off the unit when it has no connectivity. Getting set up for this requires: 1. To have the latest version of the Optiweigh App; and 2. To use the app to update the firmware of the Optiweigh Unit. Once you are ...

• How to check if Optiweigh unit is weighing properly

  Optiweigh units have weigh cells sitting out in a paddock all year round. This can cause mud and dirt to build up on and around the platform. Some of the common causes of error are: Obstructions under or at the side of the platform Mud build up under ...

• Load Bar Plug Replacement

  This article applies to Optiweigh units with Serial Numbers between 306 and 473. These units had faulty load bar plugs. Once you have received your new load bar plugs from us follow these instructions to change them over.

• Changing Load Bars

• Using the app to check your tag reader